A wall mount designed for the BlitzRCWorks Navy T-28 Trojan V2, the 1100 mm (43.3 in) EPO warbird. Display your Trojan on the wall when it is not flying.
What is in the project file
The 3MF is a Bambu Studio project with one plate and a single part: a plate with two pegs, ready to slice.
Installation
The mount has three screw holes. Fix it to the wall with screws and anchors appropriate for your wall. To hang the plane, fit the two pegs into the underside of the fuselage, between the wing and the tail.
Details
| Function | Wall display mount for the BlitzRCWorks Navy T-28 Trojan. The two pegs fit into the underside of the fuselage, between the wing and the tail. |
|---|---|
| Dimensions | 106 × 40 × 35 mm |
| Compatibility |
|
Print settings
| Material | PETG |
|---|---|
| Layer height | 0.2 mm |
| Infill | 15% grid |
| Supports | Not needed |
| Print orientation | Flat on the back plate, pegs facing up, as set in the project |
Project prepared in Bambu Studio for a Bambu Lab P1S with a 0.4 mm nozzle, 0.20 mm Standard profile, 2 walls, 5 top and 3 bottom layers and auto brim. No supports needed.
Files
License
CC BY-NC 4.0
Creative Commons Attribution-NonCommercial 4.0.
- Personal useAllowed
- Commercial useNot allowed
- ModificationAllowed
- RedistributionWith conditions
- AttributionRequired